Introduction to the role and advantages of concrete reinforcement

Concrete reinforcing agent is a kind of hardening agent with certain permeability. The material contained in the concrete reinforcing agent is a kind of highly active titanium fluoride material selected through special screening. It does not pollute the environment and is a very Environmentally friendly material, it is a colorless and transparent liquid, non-toxic, non-flammable, so how much do you know about concrete enhancers? Let's take a look at some related introductions of concrete enhancers.

<1> Features of concrete enhancer:

　　 The specially selected hardened hand can penetrate 1-3mm below the surface of the concrete, and the solidified concrete components make it a dense entity, making the concrete permanently hardened, strengthened and sealed. Suitable for plazas, warehouses, parking lots, supermarkets, industrial plants, heavy-duty machinery plants, etc.

<2> Uses of concrete enhancer:

　　1. Liquid hardener is used to harden the surface of new and old concrete to make it dust-proof, wear-resistant and resistant to corrosion by certain chemicals, and improve the durability and wear resistance of the concrete surface.

　　2, applicable to all industrial plants and warehouses, cargo unloading areas, parking lots, etc.;

<3> The advantages of concrete reinforcement:

　　 1. Compared with other liquid hardeners, the reaction is faster and more complete, the strength increases faster and higher, and the scope of application is wider;

　　2. It can significantly improve the wear resistance and durability of the concrete base surface;

　　3. Remove dust on concrete surface through chemical reaction;

　　4. Curing the sanding surface to increase the adhesion between the epoxy coating and the base layer, thereby improving the durability of the epoxy layer;

　　 5. The construction time is short, simple and easy, without interrupting production;

　　 6. Economical cost, high cost performance;

　　7. It is especially useful as a reinforcing agent and surface repairing agent for wear-resistant floors to improve the surface strength of wear-resistant floors;

　　 8. It can also be used as a maintenance and sealant for wear-resistant floors;

<4> The role of concrete intensifier:

　　1, dustproof and hardening

　　 The inherent quality defect of the low strength of the surface of the concrete ground surface is prone to wear and dust due to frequent traffic. This injustice will generate a lot of dust and cause great harm to the safety of people and forklifts. It is a common problem in the industrial field.

　　In two steps, the dust in the concrete is eliminated, and the durability of the concrete floor is improved. First, the product can penetrate 1-3 mm below the concrete surface; second, the hardening component of the liquid hardening agent reacts chemically with the loose materials in the concrete to form hard insoluble materials. This chemical reaction can harden and seal concrete layers up to a few millimeters deep.

　　2, wear-resistant

　　SEALEAD concrete reinforcing agent can eliminate loose materials in concrete, increase the density of the surface layer and improve the strength and wear resistance of concrete. Compressive strength and wear resistance can be increased by more than 40%.

　　3, sealing and impermeability

　　 The hard and insoluble matter generated by the reaction of SEALEAD concrete reinforcement can fill and block the capillary pores in the concrete to produce a dense and non-porous surface layer, which can increase the impermeability of concrete by more than 30%.

　　 4. Maintenance

　　SEALEAD concrete enhancer can seal concrete and blockage, reduce pores, reduce the evaporation of water in concrete, and strengthen the curing of concrete. Suppress tortoise cracks.

　　5, life

SEALEAD concrete reinforcement directly hardens the surface of the concrete, and the hardened layer (not an additional coating) formed is far more integrated than other hardeners and coatings to form a hardened layer "coat", permanently and permanently extending the service life of the ground.

<5> Precautions for the construction of concrete reinforcing agent:

　　 1. Use spray guns, brushes, rollers and other tools to evenly paint on the cleaned construction surface;

　　2. If the concrete surface is found to dry too quickly, it should be sprayed a second time or a third time;

　　3. After painting, water spray curing should be carried out. The curing time is generally 24-48 hours.

The above is some related introductions of concrete enhancers. Through the above introduction of concrete enhancers, we can have a more in-depth understanding of concrete enhancers, and have a certain understanding of the properties and uses of concrete enhancers. In the case of concrete reinforcing agents, you can analyze its characteristics to see if it is suitable for use of concrete reinforcing agents. If you don't know much about concrete reinforcing agents, then hurry up and take a look at some related introductions of concrete reinforcing agents.

MEtool diamond tools would help contractors to produce a perfect concrete floor, these diamond tools, such as Hybrid Transitional Tools, Floor Polishing Pads, Metal Bond Diamond Grinding Discs, Grinding Heads, diamond EZ change Shoes, PCD Wings & Cup Wheels etc. MEtool diamonds provide all of them.